1. Power Connection Method:
The LED strip must be powered by a switching DC 12V power supply. The capacity of the power supply should be determined based on the power consumption of the LED strip and the connection length. If you do not wish to use a separate power supply for each LED strip, you can choose a switching power supply with a larger capacity as the main power source, and connect all input power leads of the LED strips in parallel (extending the wiring if necessary), so that all are powered uniformly by the main power supply. Additionally, you can connect an RGB controller or use an RGB remote control to adjust the lighting colors.

2. Precautions

• LED products are very sensitive to electrostatic discharge. During installation and use, take special care to prevent static electricity, which can damage the LEDs and cause them to fail (no longer light up). Do not press on the LED surface with sharp objects.

• Select the power supply according to the total power consumption and the length of the strips used.

• Do not connect the strip directly to 110V–220V AC, as this will burn out the strip. The strip must use a dedicated power supply; do not exceed the rated power capacity.

• Working on live circuits is strictly prohibited. Installation, maintenance, and repairs must be carried out by qualified professionals; work by non-professionals is not permitted.

• During installation, avoid bending the strip exactly at the positions of the LEDs or other components, to prevent component detachment and product damage.

• Do not use any acidic or alkaline adhesives in contact with this product.

• Non-waterproof strips should not be installed in environments where humidity exceeds 50% RH. The surface drip-proof coating only provides temporary protection against splashes or light rain; do not immerse them in water or expose them to rain for extended periods. If necessary, choose products with a higher waterproof rating.